Abogado especializado en accidentes por maquinaria defectuosa en Brooklyn

How a Brooklyn Faulty Machinery Accident Attorney Can Help?

Faulty machinery can crush, sever, or burn in an instant. The days after leave you with medical bills, missed paychecks, and no clear sense of who owes you money for what happened. Consulting an experienced Brooklyn construction accident lawyer can help you work through the legal steps after a serious job site injury.

A Brooklyn faulty machinery accident lawyer at Sakkas, Cahn y Weiss starts by tracking down each party connected to that machine, from the manufacturer to the site owner to whoever last serviced it.

Attorney Matthew Sakkas spent his early career on the insurance-defense side of construction and premises cases, so he has seen firsthand how insurers try to shrink a claim before it ever reaches a courtroom. Reach out and let us take a first look at what happened before evidence disappears.

What a Machinery Injury Can Cost You in New York?

A serious machinery injury rarely stays contained to one hospital bill. Lost wages pile up while you recover, future medical care can run for years, and a permanent injury can end the career you had before.

Compensation in these cases usually breaks down into a few categories, and each one adds up faster than people expect:

• Medical costs cover everything from the ambulance ride to years of physical therapy or a future surgery. 
• Lost income covers two things: the paycheck you’re missing right now, and — if the injury limits the kind of work you can do going forward — the earning power you’ll lose for years to come.
• Pain and suffering compensates for the physical and emotional toll of the injury itself, something a stack of medical bills can’t capture on its own. 

On a construction site, New York’s Scaffold Law can push that recovery even further. It holds property owners and contractors strictly liable when a fall from a height, or an object falling from above, causes an injury — even when the worker was partly at fault. This law is narrower than it sounds: it applies to height-related accidents, not to every kind of broken or unsafe machine (N.Y. Labor Law § 240). Outside a construction site, an ordinary negligence or product liability claim may apply instead.

Common Faulty Machinery Accidents in Brooklyn

Machinery breakdowns show up in more places than a construction site, and each type of failure points to a different party who may owe you money. We regularly handle injuries involving:

• Cranes, hoists, and lifts that fail without warning
• Forklifts and pallet jacks with worn or defective brakes
• Conveyor belts, saws, and power tools missing guards
• Scaffolding motors and elevator equipment
• Factory or warehouse machinery with electrical or mechanical defects
• Generators and compressors that malfunction on active job sites

Once our faulty machinery accident injury attorneys know what broke, we work to preserve the machine itself, pull maintenance and inspection records, and bring in accident reconstruction experts as needed. That approach shapes how we build every faulty machinery claim from the first phone call forward.

Who Can Be Held Responsible for a Brooklyn Machinery Accident?

Faulty machinery cases rarely come down to one party. The manufacturer that designed or built the machine can be liable if a defect caused the failure, whether that defect was in the design itself or showed up on the assembly line. The company that maintained or repaired the machine can be liable too, if a missed inspection or a sloppy repair job let a known problem slide.

On a construction site, the property owner and general contractor carry their own responsibility. New York’s Scaffold Law puts the duty to prevent height-related falls and falling-object accidents on them, and that duty does not disappear just because a subcontractor’s crew was operating the machine. Off a construction site, the same idea plays out differently. A warehouse owner who let a forklift run on worn brakes, or a factory that ignored a known electrical fault, can be held liable under ordinary negligence or product liability law.

More than one of these parties is often responsible for the same accident, and untangling that is exactly the kind of work a Brooklyn faulty machinery accident lawyer does before evidence gets lost or repaired away. We start by mapping out each company connected to the machine, from the factory floor where it was built to the last hand that serviced it, so no responsible party gets left out of your claim.

Verdicts and Settlements Our Attorneys Have Won in Equipment Injury Cases

Adam D. Cahn secured an $11 million settlement during a products liability trial against a major automobile manufacturer. In a separate matter, Cahn obtained a $6.8 million settlement for a hospital worker who suffered severe neurological damage from lead poisoning caused by poor ventilation and faulty equipment.

Both cases turned on proving that defective equipment, not the injured worker, caused the harm. Prior results do not guarantee a similar outcome in any future case.

Preguntas frecuentes

¿Cuánto cuesta contratar a un abogado especializado en accidentes por maquinaria defectuosa en Brooklyn?

No hay que pagar nada por adelantado. Manejamos estos casos en base a honorarios contingentes, lo que significa que nuestros honorarios se deducen del dinero que recuperemos para ti, y solo si ganamos.

Can I still bring a claim if I already have workers’ compensation?

Often, yes. Workers’ compensation and a third-party lawsuit against a manufacturer, contractor, or property owner are separate systems, and pursuing one usually does not block the other.

¿Y si la máquina que me causó daño fuera defectuosa, y no solo se hubiera usado mal?

Esto apunta a una demanda por responsabilidad civil por productos defectuosos contra el fabricante o la empresa de mantenimiento, además de cualquier demanda contra el propietario del inmueble o el contratista que lo instaló en el lugar.

¿Cuánto tiempo tengo para presentar una demanda después de un accidente con maquinaria en Nueva York?

Generally three years from the date of the injury under CPLR, artículo 214(5), though shorter deadlines can apply against government entities, so acting sooner protects your options.

¿Dónde se tramitará mi demanda por lesiones causadas por maquinaria en Brooklyn?

Most Brooklyn personal injury lawsuits, including machinery injury claims, are filed and heard in the Tribunal Supremo del Condado de Kings, Sala Civil at 360 Adams Street in Downtown Brooklyn.

¿Qué indemnización puedo obtener tras un accidente causado por una máquina defectuosa?

Depending on the facts, you may recover medical costs, lost wages, future earning capacity, and pain and suffering. Reach out to discuss what your specific injury may be worth.

Get an Experienced Brooklyn Faulty Machinery Accident Lawyer on Your Case 

Faulty machinery cases move fast once the responsible companies find out you’re hurt, and the machine, the maintenance logs, and the site itself can all change before you get answers. Sakkas, Cahn & Weiss offers free consultations and takes these cases on contingency, so there’s no upfront cost to find out where you stand.

Contáctanos hoy mismo to talk through what happened and what your next step should be.

Abogados

Matthew Sakkas Abogado.

Socio

Adam D. Cahn Abogado.

Socio director

Mitchel E. Weiss Abogado.

Abogado asociado